.308 Win Bore Snakes
About .308 Win Bore Snakes
Owning a .308 Win comes with a convenience: one cord serves the whole .30 family, from a hunting bolt gun to an AR-10. A 308 bore snake from the GUNNIX catalog is pulled through the barrel right after shooting, before the fouling has set.
What Firearms a Bore Snake .308 Suits
The .30 is one of the most widespread rifle calibers: hunting bolt guns, precision rifles, AR-10 semi-autos, AK-pattern carbines and classic lever-action woods guns. The bore diameter is nearly the same across all of them, only the cartridges differ.
Close enough in diameter to .308 Win to share one cord are the .30-06, .30-30, .30 Carbine, .300 Win Mag, 7.62 NATO and 7.62x39. One pull-through will therefore cover every one of these rifles, as long as the designations you need are listed by the maker.
What to Look at When Picking a Pull-Through for .308
A full-size rifle cartridge sets its own terms: the barrel is longer, the bullet heavier, and more copper stays in the bore than after rimfire shooting. The criteria to go by:
- Stated caliber. Your cartridge – .308 Win or any other from the .30 group – has to appear in the compatibility list.
- Length to spare. A 22-24 inch hunting barrel needs more cord than a short carbine.
- Tensile strength. A long bore takes effort to pull through, and the weave has to stand up to it.
- Resistance to solvents. The fabric has to hold up to bore cleaner, while ammonia-based copper removers are best kept away from the cord, since they attack the bronze bristles.
- Suitability for washing. Without it, the consumable has to be replaced after every hunting season.
These points take a minute to check and save you a whole outing with a tool that will not do the job. When you own several rifles with barrels of different lengths, size the cord to the longest one: surplus cord is no hindrance, while missing length cannot be found out in the field.
What to Add to a .308 Bore Snake
Copper from the jackets of high-velocity bullets clings to the rifling harder than powder residue does. Fresh fouling comes away with the cord, while a dense layer of copper built up over hundreds of rounds gives way only to solvent: that is where a .30 caliber bore brush, a jag and cleaning rod sections come in. Picking them up in one order is easier than waiting on a second parcel. Both tools then sit in the safe: the cord for routine care and a kit for heavy fouling.
Why GUNNIX Pull-Throughs for .30 Caliber
Gun cleaning is the only line of work we are in. That shows in how the catalog is laid out: tools for one bore diameter sit together, and compatibility is spelled out with specific cartridge designations. Development is handled by a team in the US, we vet the production sites ourselves, and no batch reaches the warehouse without inspection.
The catalog carries a pull-through for the .30 family, .308 Win included. Check the product page for the exact cartridge list and the specifications, then add a 308 bore snake to your cart along with a brass bore brush, a cotton bore mop and a jag in the same diameter.