5.56 NATO Bore Snakes

About 5.56 NATO Bore Snakes

The 5.56 NATO round goes quickly: a single session at the range sends hundreds of shots down the barrel. A 5.56 bore snake handles that on the spot – one pull, and the rifle can go back in its case without second thoughts.

What Firearms a 5.56 Bore Snake Works With

This cartridge is a NATO standard, and rifles built around it are everywhere: AR-platform carbines, piston-driven service rifles, competition models and bolt-action varmint guns. Bore dimensions do not vary between them, so neither the maker nor the country of assembly tells you anything useful – matching the caliber is what counts.

The marking on the barrel may read differently: 5.56 NATO, 5.56x45 or .223 Rem. For a pull-through the size is the same, which is why a product description usually lists several designations at once. Find yours on that list – it is safer than going by the number on the ammunition box.

How Many Cords a High-Volume Shooter Needs

On courses and at matches, ammunition is counted in hundreds, so a cord wears out faster for those shooters than for a hunter with a couple of outings a season. The catalog carries single cords as well as sets of three: the set makes sense if more than one barrel in 5.56 sits in the safe, or if you want a pull-through in every bag – in the gear pouch, in the car and at home. The spending stays predictable, too: a single cord is priced below one box of ammunition and lasts dozens of cleanings.

What to Confirm Before Buying a 5.56 Bore Snake

Barrel length on 5.56 rifles ranges from a short carbine up to a twenty-inch rifle, and the round count per outing can run three times higher than on a hunt. So, before placing the order, confirm the following:

  • The caliber list. The 5.56 NATO designation has to appear there outright, not be inferred from a similar size.
  • Cord length. Choose a length that comfortably covers the longest barrel you own. 
  • Tensile strength. A rifled bore puts up more resistance on the pull than a smooth bore does.
  • Fabric resistance to solvents. Frequent cleaning means frequent contact with chemicals.
  • Ease of carry. In your gear, the cord should sit in a pouch alongside the magazines.

The same points help you compare several models against each other when more than one option is listed for a single caliber.

Consumables that run out just as quickly go into the same order. For the small diameter those are .22 caliber bore brushes and jags, while the chamber calls for a 5.56 chamber brush and the bolt carrier group for detail brushes: a cord does not reach those areas, and they are serviced separately. 

Choosing a 5.56 Bore Snake in the GUNNIX Range

The matching size sits in the catalog, while the product page carries the full roster of compatible designations, 5.56 NATO among them, alongside the specifications. Check the designation before you pay: that way you take home a size made for your barrel.

Put a 5.56 bore snake in your GUNNIX basket, and cleaning the barrel after training stops being a separate job for the evening.