20 GA Bore Snakes

About 20 GA Bore Snakes

The 20 gauge is chosen for its lightness: the shotgun weighs less, and the recoil is softer. A 20 Gauge bore snake follows the same logic – cleaning the barrel takes a single motion, with no table or tools laid out.

What Firearms Require a 20 Gauge Bore Snake

20-gauge shotguns are used by bird hunters, in lightweight and youth models, and by shooters who switched from 12 gauge for its milder recoil. A cord of this size fits any action – semi-automatic, pump, double-barreled or break-action single. The principle is the same everywhere: the snake travels from chamber to muzzle and removes the residue settled on the walls.

There is only one guideline for selection: the gauge designation. The 20-gauge bore is narrower than the 12 and wider than the .410, so the size must match your shotgun exactly – otherwise the cord either slips through or gets stuck. With several gauges in the safe, each calls for a cord of its own: the products look similar and are easy to mix up.

What Criteria Are Used to Select a 20 GA Bore Snake

A smoothbore barrel has no rifling for copper to accumulate in, but a shotgun roundleaves powder residue with polymer traces from the wad inside. So check the following before ordering:

  • The gauge designation in the description. A 20 GA bore snake must be listed for 20 gauge specifically, not for smoothbore barrels in general.
  • Working surface area. It determines how many passes the barrel will take.
  • The direction of the pull. The cord is inserted from the chamber side, and access there varies by action.
  • Length allowance. Shotgun barrels are longer than rifle barrels, and you need to grip both ends comfortably.
  • Product care. Something you can wash and dry lasts for dozens of cleanings, not a single use.
  • Compactness when folded. The tool fits in your palm, so you take it along without a second thought.

Checking these points in the description is faster than replacing a cord that didn't fit.

When a 20 GA Bore Snake Is Enough, and When You Need a Cleaning Rod

Hunting season means several outings in a short period, and between them the gun rarely gets a full cleaning. This is where the cord comes in: run it through in the evening at camp, and by the morning flight the barrel is ready again. Moisture is the second reason: after rain or fog, clean the bore right away.

Caked-on residue from many outings without maintenance comes off differently – with solvent, a smoothbore brush and a mop on a cleaning rod. That job is saved for the close of the season. 

Our catalog is organized by gauge and caliber: open the 20-gauge page and the accessories for your shotgun are right there. Batches go on sale only after an internal inspection. Every product page states the gauge the cord is made for, so the fit can be confirmed before checkout. 

You can place your order right from this page: a 20 Gauge bore snake by GUNNIX, plus 20-gauge bore brushes, cotton mops and rods from the neighboring sections.