36" Flexible Gun Cleaning Cable Shotgun/Long Rifle

In stock
SKU: FC-0001-036
Product

36" Flexible Gun Cleaning Cable Shotgun/Long Rifle

In stock
SKU: FC-0001-036
$1.60

Social Share:

Shotgun barrels and long rifles run 26" to 30" - and this 36" flexible gun cleaning cable provides the reach to clear them completely. Drop the cable through the breech, thread your bore brush or mop onto the exposed end at the muzzle, and pull it through the full length of the barrel. Breech-to-muzzle bore cleaning on long barrels without a three-piece rigid rod that flexes and wobbles inside the bore.

Break-action shotguns hinge open for easy breech access, but semi-auto and pump shotguns make rod-based cleaning awkward - the action gets in the way. A flexible gun cleaning cable navigates through the action and follows the bore smoothly regardless of barrel length or action type. For waterfowl hunters cleaning a 28" barrel in the field after a morning hunt, this cable and a bore brush fit in a jacket pocket. No rod sections to assemble, no bore guide to carry, no bench required.

Standard 8-32 thread connects to all gun cleaning accessories - brushes, jags, mops, slotted tips. For shotgun-specific attachments with 5/16-27 thread, use a thread adapter to bridge the gap. Coated stainless steel cable shrugs off solvents and coils flat. One bore cleaning cable that handles every long barrel in the safe.


Product Type:
Flexible Cleaning Cable
Firearm Type:
Rifle, Shotgun
Pack Size:
3-Pack, Single
Cable Material:
Coated Stainless Steel
Cable Length (in):
36"
Cable Length Range:
Long (36"+)
Compatible Accessories:
Brushes, Jags, Mops, Slotted Tips
Connector Type:
Male Thread, Pull Handle
Coil-Friendly:
Yes
Thread Size:
8-32
Country of Origin:
Imported (China)
Brand:
GUNNIX
Why is the 36-inch cable recommended for shotguns?
Shotgun barrels run 18 to 32 inches for most hunting and sporting models. A 36-inch cable handles even the longest shotgun barrels with enough excess to grip and attach accessories. It also works for long-barreled rifles. The extra length over the 34-inch cable matters for 28-inch and 30-inch shotgun barrels, where a shorter cable would barely exit the muzzle.
Does this cable work with shotgun cleaning accessories?
The cable tip has 8-32 threads (rifle/pistol standard), so you'll need a 5/16-27 to 8-32 thread adapter to attach shotgun brushes, mops, and jags. With the adapter, all your 12 gauge, 20 gauge, and .410 bore accessories work with this cable. Alternatively, if you have rifle-threaded (8-32) versions of shotgun accessories, they attach directly without an adapter.
Can I use this cable on a break-action shotgun?
Yes - and it's one of the best tools for the job. Break-action shotguns (over/unders, side-by-sides, single-shots) give you easy breech access when opened. Drop the cable through from the breech, thread on your brush or mop at the muzzle end, and pull through. The flexible cable follows the bore without contacting the chamber walls or forcing cone. No rigid rod to align, no risk of crown damage.
How is a cable different from a bore snake for shotgun cleaning?
A bore snake is a one-pass tool with a built-in brush - convenient but you can't change accessories or adjust how much solvent you use. A cable lets you attach the specific accessory you need for each step: brush for scrubbing, mop for solvent, jag with patch for inspection. For heavy wad fouling after a full day of shooting clays, the cable with a proper bore brush and solvent cleans more thoroughly than any bore snake.
Can I use this cable for both a shotgun and a rifle?
Yes. The 36-inch length handles any barrel up to ~30 inches. Thread the cable with a rifle brush or jag (8-32 direct) for rifle cleaning, or add the 5/16-27 adapter and attach shotgun accessories. One cable, one adapter, and your entire collection is covered. The cable coils flat in your range bag - lighter and more compact than carrying separate rods for each firearm type.