20-Pack .30 Caliber Brass Jag

In stock

SKU: JG-0001-030-p20

Product

20-Pack .30 Caliber Brass Jag

In stock

SKU: JG-0001-030-p20

$60.00

$52.80

Packs

Available Options

.30

$3.00

Know before you buy:

Shipping Policy Return & Refund Policy

Social Share:

Every rifle chambered in .308, .30-06, .30-30, .300 Win Mag, .300 Blackout, 7.62x39, or 7.62 NATO shares the same 0.308" groove diameter - and this .30 caliber brass jag fits all of them. Thread it onto your cleaning rod, wrap a patch over the tip, and push through. The brass jag holds the cleaning patch centered and tight against the bore walls, pulling carbon and copper fouling out with every pass.

No caliber family sees more variety of use than .30 cal. From lever-action deer rifles to semi-auto battle rifles to bolt-action precision rigs - the fouling profile differs with each platform. Gas-operated guns like the AR-10 accumulate more carbon. Bolt-action .308 precision rifles build copper fouling. And .30-30 lever guns used with exposed-tip soft points leave lead traces. A gun cleaning jag handles all three fouling types because the technique stays the same: wet pass, soak, wipe, repeat.

This is the jag most shooters reach for first. If you own anything in .30 cal, it earns its spot in the cleaning kit permanently. Use 2" square patches for bore cleaning - they wrap around the jag tip without doubling over. Push through, let the patch fall off at the muzzle, pull the rod back clean.

Caliber:

.30-06, .300 Win Mag, .30-30, .308 Win, .30 Carbine, 7.62 NATO, 7.62x39

Product Type:

Jag

Firearm Type:

Rifle

Use Case:

Final Patch Cleaning

Jag Material:

Brass

Tip Style:

Pierce

Bore Diameter (in):

0.308

Thread Size:

8-32

Pack Size:

10-Pack, 20-Pack, 3-Pack, 5-Pack, Single

Country of Origin:

Imported (China)

Brand:

GUNNIX

What size jag do I need for .308 Winchester?

Use a .30 caliber brass jag with 8-32 threading. This jag fits every rifle in the .30 caliber family: .308 Win, .30-06, .30-30, .300 Win Mag, .300 Blackout, .300 PRC, 7.62x39, and 7.62x51 NATO. The bore diameter is the same across all of them - 0.308 inches. Note: .303 British has a slightly larger bore (.311"), so a .30 cal jag will be slightly undersized for it.

Is a .30 caliber jag the same as a .308 jag?

Yes, they are identical. ".30 caliber" and ".308" both describe a 0.308-inch bore diameter. Some manufacturers label the jag ".30 cal," others say ".308" - it's the same product. Don't confuse this with a .300 Win Mag chamber jag, which would be a larger tool designed for the wider chamber, not the bore.

How does a jag clean differently than a slotted tip?

A jag wraps the patch around its pointed tip, pressing it firmly against the bore walls - you get full 360-degree contact with consistent pressure. A slotted tip threads the patch through a slot, creating a folded configuration with uneven contact. The jag removes more fouling per pass because of this tighter fit. The trade-off: jag cleaning is one-direction (patch drops off at the muzzle), while a slotted tip allows back-and-forth.

What patch size works best with a .30 caliber jag?

A 2-inch square patch is the standard for .30 caliber jags. Some shooters prefer 1.75-inch for a slightly looser fit that requires less force. The correct size depends on your specific jag - every manufacturer machines jags to slightly different tolerances. Test by pushing a dry patch through: firm resistance = correct, excessive force = too big, no resistance = too small.

Why do my patches turn blue-green even after the bore is clean?

If you're using an ammonia-based copper solvent, the blue-green color may be coming from the brass jag itself - not copper in the bore. Ammonia dissolves brass. This is a known issue called "false copper reading." Solutions: switch to a non-ammonia copper solvent, use a nickel-plated jag with aggressive solvents, or use a nylon slotted tip during the copper-solvent soak phase. Your brass jag is still the best tool for standard bore cleaners and CLP.